LELY TIGO XR100D TRAILER V 1.2

1459014565_lely-tigo-xr100d

Description:
Why did 105 m ^ 3 Ladevolumen ?:
I see in my Lely rather a loader wagon, as a HTW. Therefore I have given him a capacity called the “volume at medium pressure”. This gives Lely 100m ^ 3 to (hence the 100 in the name).
This volume is achieved by compression of the collected cargo in the pickup.

For straw, grass and hay, the InGame comes from the weight and thereby then driving behavior about right.
If anyone has the right to use the Tigo mainly as HTW, he can for his household (!) Change the volume!
(In LelyTigo.xml and in Moddesc found this each attribute capacity. In the first case there is the amount of charge and in the second it changes the description of the dealer)
The volume DIN were loud Lely 54m ^ 3
The volume of cargo space in the mod is about 60m ^ 3

Furthermore, requires the Tigo 180hp PTO. From irgentwas yes densification must be created 😉
Therefore my power rating from dealer of 300PS is rather something like a minimum-power. I have only tested with the standard tractors attempts:
The big Deutz was going on flat maps. The T8.320 is rather starved, even though he has more power. The T8.435 and Knicklenker are too heavy again. My recommendation and in my test drive the best tractor in front of Tigo Magnum 380 …… time is quite apart from the color aspect ……

If anyone noticed that the Tigo flings behind the tractor (or drifts or slidet. Whatever they call the trailer), then he was too fast in a curve !!!
This “bug” (= the CenterOfMass is too high), I’ve purposely inside left, as he very well clarified what the often underestimated Probelm when driving with such a large load weighing (best yet with over 60km / h) is precisely this high focus !!!
Ingame you can not let the box fall over, otherwise I would leave the escalate so far.

Version 1.2
– Entladepartikel heruntergesetzt auf eine Höhe, die durch die Drehung der oberen Walze erreicht werden kann.
– Spalte oben und unten an der Bordwand geschlossen
– Schwerpunkt tiefer gelegt. Meinerseits der letzte Kompromiss zwischen Realität und Schnell fahren.
Sonst:
– Langsamer Fahren!
– LelyTigo.xml öffnen –> Attribut “Center of Mass” suchen –> Der zweite Wert gibt die Höhenlage des Schwerpunktes
an –> ändern auf 1 (oder kleiner 1)
Mit diesem 1m liegt das Ding auf der Straße wie n Kart, schwankt nicht und rutscht schon gar nicht… Wer das so
braucht, der kann das ja für sich so zurechtbiegen!

Credits:
Annernas

DOWNLOAD LelyTigoXR100.zip – 23.3 MB

(Visited 1 times, 1 visits today)

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *